Evaporative Cooling Pad
- Category: Evaporative Cooling
- Hits: 2745
Evaporative Cooling in Concept
To counter periods of extreme temperature that affect in-house environments and therefore production, Coolair Evaporative Cooling Pad Systems are used with outstanding success. When large quantities of air are pulled through Evaporative Cooling Pads that are saturated with water, a substantial cooling effect is realized due to the evaporation of that water. Used in conjunction with Coolair fans, a temperature reduction of 10-25 degrees is commonplace. Suited for virtually all geographic locations, the Coolair Evaporative Cooling System delivers the greatest economic benefits to areas where higher temperatures during longer periods of time are normal.
The Evaporative Cooling Pad
Evaporative Cooling Pads (Evap Pads) are a product developed for horticultural and agricultural cooling applications. Evap Pads are made of a specially formulated cellulose paper, impregnated with insoluble anti-rot salts, stiffening saturants and wetting agents. Evap Pads have a cross fluted configuration that provides maximum cooling when warm air passes through the wet Evap Pad material.
• Evap Pads will not sag, rot or develop holes.
• With proper care and maintenance, Evap Pads will last for 5 years or more.
• There is no carry-over of water droplets to enter the house.
• Aesthetic appearance of Evap Pads compliments modern buildings.
Evap Pads are 4” or 6” thick, and 12” or 24” wide with height increments every 12” from 24” to 72”. The Evap Pads are positioned adjacent to each other to form a continuous surface of the required height and length. In addition to the standard Evap Pad, Edge-coated pads, which help reduce algae growth or build-up, are also available. All 6” Evap Pads and 4” Evap Pads up to 48” tall are self-supporting, and do not require wire baskets or other supporting materials. The pads are held in place by component parts of the system. Tall pad supports are required on 4” pad systems over 4’ tall. Standard Evaporative Cooling Systems are available from 2’ to 6’ tall in lengths up to 110’. Systems up to 12’ tall are available with American Coolair’s ‘Doublestack’ Evap Pad Cooling System.
• System length 5’ to 110’ - System height 2’ to 6’
• Completely self-contained
Pump and Sump